Ez Vape Instructions
Just as the name of the vaporizer suggests, the Ez Vape is really “easy” and versatile to use. Just follow these simple steps and you will be ready take a clear and pleasurable hit!
Put the Ez Vape to its maximum temperature
As with any brand new vaporizer you buy, the Ez Vape herbal vaporizer
has a few packing minerals on its surface. These can be eliminated by turning on the temperature controller of the vaporizer to the highest level when you use it for the very first time. Let the temperature remain its highest for the next fifteen minutes.
This will ensure that all of the packing minerals sticking to the ceramic heating element burn completely. This way, the vapor of the herbs that you use later will be pure and uncontaminated. This step is certainly a pre-requisite before you go on and experiment with real herbs but make sure that you carry this process out in a well ventilated area.
While the vaporizer is burning the packing minerals you can buy time and start grinding your herbs. Grinding your medical herbs is important when vaporizing with the Ez Vape because this way the herbs will be more uniformly vaporized and you will get the most active ingredients out of them. After finish grinding place the herbs inside glass whip, on top of the metal screen.
You can use the vaporizer pick to uniformly place the herbs on the screen. The vaporizer pick is also ideal to clean this screen or to take it out when you want to replace it with a new one. Make sure not to overload as this may result in burning of the herbs.
Connect the glass whip to the Ez Vape glass heating element
After the 15 minutes passed (to burn out the packing minerals) you can go ahead and connect the glass whip (with the herbs loaded) to the glass heating element and set the temperature around 300 F. Depending on the herb density and humidity the vaporizing temperature can vary. You will need to play with the Ez Vape temperature until you find the best vaporizing temperature for your herbs. Ez Vape allows you to inhale 5 to 8 hit from a loaded bowl.
If this is not your first time when using the vaporizer you will need to let it run around 3-4 minutes before placing the herbs and start the vaporizing process. Just press the button on the front part of the instrument to switch it on; then you need to turn the knob of the Ez Vape herbal vaporizer
clockwise and set the temperature.
Now all you have to do is to wait for some time until you see a clean white mist forming in the glass dome of the marijuana vaporizer. The white mist is the result of “vaporization” of your favorite herb by convection method. In other words, hot air is passed through the herbs which are then “boiled” to form vapors. This is the ninety percent pure aura of the herb you are using. Just take in all the goodness of the material. You will be able to get a “clean hit”
if you follow these steps correctly. It is better to use the tubes supplied to get a truly unique experience of your favorite herb.
A point of caution would be not to inhale too slowly or let the heating element get too hot. This might burn the material. In case this happens, please do not panic. Just replace the charred herbs with new ones and continue to enjoy the pristine vapors of your material. That is pretty much all there is to know in order to be able to effectively operate the amazing Easy Vape electric vaporizer. Ensure that you use high quality herbs to accentuate the wondrous effect produced by using the Ez Vape marijuana vaporizer.
See more Ez Vape instructions